Home> Products> Medium And Low Pressure Hoses> Oil Hose> Cotton thread braided winding oil-resistant rubber hose
Cotton thread braided winding oil-resistant rubber hose
Cotton thread braided winding oil-resistant rubber hose
Cotton thread braided winding oil-resistant rubber hose

Cotton thread braided winding oil-resistant rubber hose

$0.2≥500Others

Payment Type:L/C,T/T,D/A,D/P,MoneyGram
Min. Order:500 meter
Port:Qingdao Port
Product Attributes

Model No.Oil rubber hose 4.8mm

Place Of OriginShaanxi, China

Brand NameYanchang NR Co.,Ltd

Processing ServiceMoulding, Cutting

SampleFree

MaterialRubber, cotton thread

StandardGB/T15329-1994

Temperature Range-40~100 ℃

Inner Diameter4.8mm±0.3

Outer Diameter10.5 mm

Burst Pressure1.0Mpa

Packaging & Delivery
Selling Units : meter

The file is encrypted. Please fill in the following information to continue accessing it

Product Description

Aircraft Ground Refueling And Oil Drainage Hoses has the advantages of small outer diameter tolerance, excellent oil resistance and heat resistance, light weight, soft and durable body, etc. The small burst pressure of the hose is four times of the working pressure.

  Steam Rubber Hose


Steam Rubber Hose applies to deliv er overheated water under 144℃ and the saturated steam below 0.3MPa

Composition
Steam hose is made up of inner rubber layer, multi-layer cloth wrap layer and outer rubber layer. Cloth-attracting hose is composed of inner rubber layer, multi-layer cloth-wrapped layer, spiral steel wire reinforcement layer and outer rubber layer. Mainly composed of liquid-resistant inner rubber layer, middle rubber layer, 2 or 4 or 6 layers of steel wire winding reinforcement layer and outer rubber layer, the inner rubber layer has the function of making the conveyed medium bear pressure and protecting the steel wire from erosion, the outer rubber layer protects the steel wire from damage, and the steel wire (φ0.3--2.0 reinforced steel wire) layer is the skeleton material to play a reinforcing role.
Features
The inner and outer rubber layers of the hose are made of synthetic rubber with excellent heat resistance, and the body of the hose is soft, light, flexible and high in heat resistance.




Rubber Code ID
workingpressure
Inner diameter 
(mm)

Reference Diameter
(mm)

Wrapping layer
(single)

Brai ding layer

Working pressure
(Mpa)
4.5-1.0 4.5±0.3 10.5 1 1.0 
4.8-1.0 4.8±0.3 10.5 1 1.0 
5-1.0 5±0.3 12 1 1.0 
5-1.5 5±0.3 12.5 1 1.5 
5-2.0 5±0.3 12.5 1 2.0 
6-1.0 6±0.3 13 1 1.0 
6-1.5 6±0.3 13.5 1.5 
6-2.0 6±0.3 13.5 2 2.0 
6.3-1.0 6.3±0.3 13 2 1.0 
8-1.0 8±0.5 15 2 1.0 
8-1.5 8±0.5 16 2 1.5 
8-2.0 8±0.5 16 2 2.0 
10-1.0 10±0.5 17.5 2 1.0 
10-1.5 10±0.5 17.5 2 1.5 
10-2.0 10±0.5 17.5 2 2.0 
12-1.0 12±0.5 20 2 1.0 
13-1.0 13±0.6 23 2 1.0 
16-1.0 16±0.6 25 2 1.0 
19-1.0 19±0.7 29 2 1.0 
22-1.0 22±0.7 32 1 1.0 
25-1.0 25±0.8 35 1 1.0 


Steam Rubber Hose

Selection of Rubber Hose

Feeding style

Itrefers to discharge or suction medium under normal pressure or under-pressure, or both.Working pressure
It refers to internal pressure that rubber hose bears under normal working condition. Select correctrubber hose according to its working condition can not only make full use of the rubber hose, but alsoguarantee the safety when working.
Feeding medium
Select proper rubber hose according to the property of the medium. Any substitute or misused rubberhose will cause early failure or even injure.
Working temperature
Generally, the working temperature is -50 to 200℃ , The temperature range for feeding medium isbelow 45℃.If beyond the range, the customer shall inquire when order.
Specification and dimension
It refers to the inspected ID and tolerance of the product (if the customer has requestto the OD and tolerance, please indicate).

Water Supply Hose


Specification: within 350mmWorking pressure: below 2.0MPa
Property and application: supply water or neutral liquids under normal temperature; aging and abrasionresistance.

Air Rubber Hose
Specification: within 350mmWorking pressure: below 2.0MPa
Property and application:delivery air or other inert gas under normal temperature; Rubber Hose Pipe  is flexible andits inner lay er has advanced air tightness and the cover layer has advanced aging and abrasion resistance.

Water Suction Hose
Specification: 25 to 380mm
Working pressure: below 2.0MPa, degree of vacuum bearing is 80.0KPa(600mmhg) below.
Property and application: discharge and suction water of normal temperature and neutral liquids; the hosehas adv anced anti-sag and bending property,  Water Hose  is very durable.
Sand Blast Hose, Cement Blast HoseSpecification: within 350mm
Working pressure: below 2.0MPa
Property and application:
1.To supply quartz sand and iron sand under normal temperature that can clean the descalingon the cast.
2.Assist construction pump vehicle to deliver concrete cement. The hose has stable bearingstrength; its inner layer has advanced acid and alkaliresistance and abrasion proof.

Mud Suction Hose, Mud Discharge Hose
Specification: within 350mm
Working pressure: below 2.0MPa,degree of vacuum bearing shall be 80.0KPa(600mmhg)) below.
Property and application: it is used to deliver mud cement for road or bridge,pile-work andsuction or discharge mud cement in harbors, rivers or lakes. The hose body has good bearing strengthand will deform less under pressure; in addition, the hose has good elasticity,abrasion proof and theability of anti-sea water etch. The hose has good stability and will not be flatted.


Oil-Proof Hose Heat-Resistant Hose,Acid-Resistant Hose,Alkali-Resistant Hose, StaticHose and Flame Retardant Hose



Company Overview

Shaanxi yanchangpetroleum northwest rubber llg is a state-owned company, which was regrouped from the former Northwest General Rubber Factory and its subsidiary Nortlnwest Kaidi Company, It is the largest rubber enterprise in size and the strongest in comprehensive strength in northwest China. Kaidi Northwest Rubber Co.Ltd is a vice director of China Rubber Industry Association and the board chairman of national rubber product branch.
is a state-owned company, which was regrouped from theformer Northwest General Rubber Factory and its subsidiary Northwest Kaidi Company, and is subordinate to Shanxi Yanchang Petrol (Group) Corporation.It is the largest ruber enterprise in size and the strongest in comprehensive strength in northwest China. Kaidi Northwest Rubber Co. Ltd is a vice director of China Rubber Industry Association andthe board chairman of national rubber product branch.
The company is situated in xianyang hi-tech development zone and has good traffic facilities, with its own special railway and Xi'An-Baoji Express to its south andl Xi'An-Xianyang International Airport to its north. The company covers an area of more than 400000 square meters and has 2200 staff and workers, of which 320 members are engineering technicians. The company consists of one technical center, one test and detection center, three product research rooms and twelve preduction works. It also has 10 sales branch offices distributed in East China, Southwest China South China, North China and Northwest China. The company has comprehensive rubber processing capacity of 6000 tons worked out by rubber compounds, and its annual production value amounts to3 hundred million yuan.
The products manufactured in the company are classified into five : rubber fabric products, rubber products, rubber plate, seals and hoses, which mostly serve petrol,chemical, steel and iron, automobile, engineering machinery, coal industries, etc.In recent years, the company has developed corrosion-proof liner, packer for oil or gas well, oil vessel and oil delivery hoses and so on.
With tens of production equipment and test instrumentimported from abroad, the company possesses advanced production technique and test means.Its technical center has turned into a provincial scientific research technical center. The company has the authority to import and export comnodities.It passed ISO9001:2000 and GJB9001A-2001 quality system attestation in the March of 2003, The company is also attested as a first-class quality inspection organ by China Petrol and Chemical Industry Association.
The company is rated as Advanced Enterprise“by Shalnxi Provincial Government and Advanced Enterprise for Serving and Cooperating with National Defense Scientific Industry”, and won national scientific progress prize awarded by the State Council.

Company Photos
Production Certification
Home> Products> Medium And Low Pressure Hoses> Oil Hose> Cotton thread braided winding oil-resistant rubber hose
Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send